|
 |
|
|
|
|
 |
|
|
| Product Description | |
|
Sekisui #5760 Double-sided Thermal Adhesive Tape (the same tape used by major manufacturers like ThermalTake, Coolermaster, Nikao & many other heatsink suppliers) as used in RAM Memory & Northbridge heatsink cooling kits.
Thermal Resistance @ 45C Rja (oC/W) - thickness 0.001377949" or 35micrometers or 0.035mm. Full official specs here (if you can read Japanese) http://i-front.sekisui.co.jp/itape/html/products/tds/pdf/5760.pdf
Safer than epoxy thermal adhesive with similar cooling ability, careful and appropriate removable will not damage expensive components.
Note: Once applied removal of the heatsink/s may not come easily. As always, measure twice and apply only once.
Other info ...
This is genuine Sekisui thermal tape. Because I have bought in bulk it bears no label on it.
Each item being sold is approximately 1" wide x 6" long (25mm x 152mm).
So, if you buy 2 items, that's 2x1"x6" strips, if you buy 3 items, that's 3x1"x6" strips etc.
This tape is great if you want to tape a heatsink to your motherboard chipsets, RAM or video card memory to cool it down. Using this method is better than thermal epoxy because it does not create a permanent bonding so you can remove the heatsinks at a later time. NOTE: if you use a mechanical clamp to fix the heatsink do not exceed a pressure of 50PSI, as this will cause the tape to bleed out.
This thermal tape cannot be used on a CPU/GPU. If you use this tape on a CPU/GPU, you will fry it. If you need thermal protection for your CPU/GPU do NOT use this product, use an alternative CPU-preferred thermal compound. | |
|
 |
|
